SSD_Flash Support List
Disclaimer:
-
The peripherals specified on this compatible peripheral list (“List”) have been tested by SigmaStar as compatible with SigmaStar’s chip products (“SigmaStar’s Chip”). Please note that SigmaStar tests only the peripheral samples provided by vendors or customers and the foregoing compatibility test results shall apply only to such samples.
-
You could choose at your sole discretion and demand to purchase and use any peripheral on the List with SigmaStar’s Chip. Nevertheless, you should understand that SigmaStar’s compatibility test cannot replace your normal production qualification. Therefore, you should conduct dedicated test in accordance with your normal production qualification procedure prior to using or purchasing such peripherals.
-
You should understand that no warranty of any kind, whether express or implied, is provided by SigmaStar for any peripheral on the List (including, but not limited to, any warranty with regard to the design, production, quality, performance, merchantability, or fitness for a particular purpose of the peripheral). SigmaStar is not liable for any loss, damage, or liability resulted from or relating to the use of any peripheral on the List.
1. Note¶
-
The following flash list only guarantees normal startup. The public version cannot guarantee that each flash will undergo a complete stress test. If necessary, please stress test yourself to verify the reliability.
-
Please contact the flash manufacturer for the quality of the flash.
-
Regarding the CR Mode of Nand, unless the customer specifically requests to support it. CR Mode is more complicated and is only used for IPL.
2. NOR FLASH¶
| NOR（ID） | Review | Clk | Quad |
|---|---|---|---|
| W25Q128（EF-40-18） | ok | 54M | ok |
| GD25Q128E（C8-40-18） | ok | 54M | ok |
| XT25F128B（0B-40-18） | ok | 54M | ok |
| FM25Q128A（A1-40-18） | ok | 54M | ok |
| XM25QH128AHIG（20-70-18） | ok | 54M | ok |
| ZB25VQ128A（5E-40-18） | ok | 54M | ok |
| MX25L25645G（C2-20-19） | ok | 54M | ok |
| MX25L12833F（C2-20-18） | ok | 54M | ok |
| XM25QH32BHIG（20-40-16） | ok | 54M | ok |
| XM25QH128C (20-40-18) | ok | 54M | ok |
| XM25QH64C (20-40-17) | ok | 54M | ok |
| MX25L3236F(0xC2- 0x20- 0x16 ) | ok | 54M | ok |
| XM25QH256B(20-60-19) | ok | 54M | ok |
| W25Q64 (EF-40-17) | ok | 54M | ok |
| NM25Q128EVB( 52-21-18) | ok | 54M | ok |
| BY25Q128AS( 68-40-18 ) | ok | 54M | ok |
| GD25Q256E (0xC8 0x40 0x19 ) (16bit register) | ok | 54M | ok |
| IS25LP064D(0x9D 0x60 0x17) (8bit register) | 54M | ok | |
| IS25LP128F ( 0x9D 0x60 0x18) | 54M | ok | |
| PY25Q128HA (0x85 0x20 0x18) | 54M | ok | |
| W25X05CL (0xEF 0x30 0x10) space is too small, only 64KB can only run to IPL | 54M | no (not supported) | |
| GD25Q40C (C8-40-13) | 54M | ok | |
| XT25F16B ( 0x0B 0x40 0x15 ) | 54M | ok | |
| BY25Q16BS( 0x68 0x40 0x15) | 54M | ok | |
| W25Q16DV (0xEF 0x40 0x15) | 54M | ok | |
| W25Q16JV (0xEF 0x40 0x15) has the same ID as above W25Q16DV but the registers are different | 54M | ok |
3. NAND FLASH¶
| NAND(ID) | Clk | Quad | CR | Review |
|---|---|---|---|---|
| W25N01GV (EF-AA-21) | 54M | ok | no | ok |
| GD5F1GQ4UEYIH (C8-D9) | 54M | ok | no | ok |
| GD5F1GQ4UBYIG (C8-D1) | 54M | ok | no | ok |
| MX35LF1GE4AB (C2-12) | 54M | ok | no | ok |
| MT29F1G01ABAFD (2C-14) | 54M | ok | no | ok |
| FS35ND01G-S1Y2 (CD-EA-11) (flash tail or random 6~8 bad blocks) | 54M | ok | no | ok |
| FS35ND02G-S3Y2 (CD-EB-11) | 54M | ok | no | ok |
| XT26G02E（2C-24） | 54M | ok | no | ok |
| MX35LF2GE4AD（C2-26-03） | 54M | ok | no | ok |
| GD5F1GQ5UEYIH（C8-31） | 54M | ok | no | ok |
| GD5F1GQ5UEYIG（C8-51） | 54M | ok | no | ok |
| F50L1G41LB（C8-01） | 54M | ok | no | ok |
| TC58CVG0S3H ( 0x98- 0xE2- 0x40 ) | 54M | ok | no | ok |
| TC58CVG1S3H (0x98- 0xEB - 0x40 ) also has a same model with different ID (0x98 0xCB), does not support quad write | 54M | ok | no | ok |
| FM25S01 ( 0xA1- 0xE4 ) | 54M | ok | no | ok |
| XT26G01B( 0x0B-0xF1) | 54M | ok | no | ok |
| GD5F2GQ5xExxG( 0xC8-0x52) | 54M | ok | no | ok |
| XT26G01A (0B-E1) This flash needs to find the manufacturer to update the firmware, otherwise, an ECC error will occur at startup. After the firmware is updated, the flash id will change, and it is not the flash, so this flash model is understood as not supported | fail | |||
| DS35X4G [ 512M ] (E5-F4) This Flash needs to be directly soldered to the board for testing, otherwise it may not work | 54M | ok | no | ok |
| MX35LF1G24AD (0xC2 0x14 0x03 ) This Flash does not support hardware ECC, and Onebin cannot adapt to this Flash | fail | |||
| XT26G11C (0x0B 0x15 ) | 54M | ok | no | ok |
| DS35X1GA (0xE5 0x71 ) | 54M | ok | no | ok |
| DS35X2GA (0xE5 0x72) | 54M | ok | no | ok |
| MX35LF2GE4AB (C2-22) | 54M | ok | no | ok |
| F35SQA001G (0xCD 0x71 0x71) special Flash, need to update TOOL (1.0.5) and update uboot and kernel, sni increase the volatile of flags | 54M | ok | no | |
| MX35LF4G24AD (C2-35-03) This Flash does not support hardware ECC, and Onebin cannot adapt to this Flash | fail | |||
| TC58CVG2S0HRAIJ (0x98 0xED 0x51) This Flash does not support hardware ECC, and Onebin cannot adapt to this Flash | fail | |||
| GD5F4GQ6xExxG (0xC8 0x55) | 54M | ok | no | |
| MT29F4G01 (0x2C 0x36) 4K Page not added | fail | |||
| MT29F2G01ABAGDSF (0x2C 0x24) | 54M | ok | no | |
| GD5F2GM7UExxG( 0xC8-0x92) | 54M | ok | no | |
| W25N512GV( EF-AA-20) | 54M | ok | no | |
| XCSP1AAWH-NT (0x9C 0x01) | 54M | ok | no | |
| MX35LF2G24AD (C2-24-03) This Flash does not support hardware ECC, and Onebin cannot adapt to this Flash | fail |